
The YCD-2 hydraulic turnout tamping tools railway is an ideal maintenance machine for railway turnout tamping. It operates in groups of four or two, depending on the application. It is primarily used for tamping high-speed turnouts, standard turnouts, and turnout areas. It can also handle ballast tamping on conventional lines.
This machine is suitable for tamping turnout sections, the most complex and challenging areas for railway turnout maintenance. It can be used for tamping turnsouts, turnout joints, frogs, guardrails, and other sections.
The turnout tamping tools railway offers easy operation, high efficiency, and a low failure rate, fully meeting the requirements of railway ballast tamping operations.
Product Specification
|
Power |
Gasoline engine GX390 9.6KW |
|
Vibration frequency |
65-67Hz |
|
Exciting force |
32.5kN |
|
Working pressure of hydraulic system |
4Mpa+0.5Mpa |
|
Hydraulic oil brand number |
N32 hydraulic oil |
|
Work efficiency |
1 set of turnouts/30-40 minutes |
|
Ordinary line |
240 sleepers/hour (under normal operating conditions) |
|
Dimensions |
1350x520x1650mm |
|
Main weight |
335kg |
Features
The hydraulic turnout tamping tools railway features a rationally designed structure and a reaction-free, toggle-type lowering mechanism, ensuring safe and reliable operation without derailment or falling off the track. Its rotating traveling frame adapts to tamping operations in various locations along the switch area. A new synchronous cylinder clamping mechanism eliminates the fragile synchronization rod.
Its patented single-lever control valve ensures easy operation and high efficiency. Powered by an imported gasoline engine, it offers reliable performance, safety, and environmental friendliness, improving the operator's working environment, ensuring tamping quality, and increasing efficiency.
The application of multiple patented technologies gives this machine advanced technical performance, enabling it to meet the technical requirements of tamping operations for various switch types.

Routine Maintenance

1. Inspect the machine body for cracks, deformation, loose bolts, and other abnormalities.
2. Inspect the hydraulic system and check the oil pipes and joints for leaks.
3. Check the hydraulic oil level and oil quality.
4. Check the handle, control valve, and cylinder for smooth movement.
5. Maintain sufficient fuel and ensure the lubricating oil and air filters are in good condition.
6. Thoroughly remove debris, dust, and oil from the machine body to prevent accumulation that could affect operation.
7. Tighten all loose bolts and joints, especially the drill rod, handle, and hydraulic pump joint.
8. Inspect the tamping drill bit for severe wear or cracking, and replace if necessary.
9. Maintain good lubrication of the vibration mechanism and pay attention to abnormal bearing temperatures or noise.
Applications
1. For tamping operations in turnout areas: Suitable for tamping trackbeds in high-speed, conventional, standard, and special turnout areas.
2. Adaptable to complex structural locations: Efficiently operates in complex areas such as switches, guardrails, turnout joints, and gauge changes, making it a valuable supplementary device for applications difficult to cover with traditional large tamping machines.
3. Suitable for group operation: Two or four tamping machines can be used in conjunction to meet diverse work surface widths and structural requirements.
4. Suitable for tamping on conventional lines: In addition to turnouts, it is also suitable for tamping gravel tracks on conventional straight and curved lines.
5. Improving maintenance efficiency and quality: Flexible operation and dense tamping contribute to improved track stability and train smoothness.

Main Advantages
1. Adaptable to Complex Turnout Structures: Designed specifically for turnout areas, it efficiently completes tamping tasks at difficult locations such as switches, guardrails, and point rail connections, effectively complementing larger tamping equipment.
2. High Efficiency in Group Operation: It supports two or four units for combined operation, covering a variety of turnout types and widths, ensuring continuous operation and increased efficiency.
3. Hydraulically Driven, High Vibration: Utilizing a high-frequency hydraulic vibration system, it achieves high tamping density, effectively improving track support strength and train ride smoothness.
4. Easy Operation and Maneuverability: The control handle layout is intuitive and user-friendly. The compact size makes it suitable for operations in areas with limited space or complex structures.
5. Low Failure Rate and Easy Maintenance: The optimized structural design reduces wearing parts, simplifies maintenance, and ensures stable operation, minimizing downtime.
Company Information
Our company is based in the Zhengzhou High-Tech Industrial Development Zone, covering an area of more than 30 mu (approximately 20,000 square meters). Our factory has a total construction area of about 15,000 square meters, including a modern office building of over 5,000 square meters.



Hot Tags: tamping tools railway, China tamping tools railway manufacturers, suppliers, factory
