Ballast Tamper Machine

DG-550×4 electric ballast tamper machine is a kind of multi-station high-efficiency railway construction machine, four electric tamping picks driven by a generator work at the same time, suitable for railway ballast tamping, sleeper stabilisation and other maintenance tasks.

The ballast tamper machine is small, strong vibration force, easy to operate, widely used in railway repair and clear sieve after the track backfill operation. Its working principle is through the motor driven eccentric wheel high-speed rotation, generating high-frequency vibration transmission to the pickaxe, so that the tamping bar into the ballast and through the vibration tamping roadbed, thus improving track stability and geometric accuracy.

1. Ballast tamper machine in railway line maintenance: suitable for overhauling, tamping after clearing and sifting, and restoring compaction after rail sleeper replacement.

2. Combined team work: four people operate at the same time, suitable for improving work efficiency and coverage.

3. Various rail types: suitable for concrete, wooden sleepers and gravel roadbeds.

4. Construction in urban railways or dense areas: electric drive reduces emissions and noise, making it more environmentally friendly and compliant.

1. Multi-functional combination system: one ballast tamper machine with four picks, multi-person co-operation, efficient operation.

2. High excitation force and frequency: up to 3 kN excitation force, 48 Hz frequency, can effectively compact track ballast.

3. Compact and easy to carry: only 26.5 kg each, compact structure, suitable for multi-person division of labour.

4. Simple structure and maintenance: modular electric pick and generator design, low maintenance costs, easy to operate.

5. Environmentally friendly and low noise: electric drive is more environmentally friendly, suitable for urban railways or construction scenarios in strict environments.

1. Ensure that the power cord is not broken and the plug is in good contact to avoid leakage or short circuit.

2. After each operation, wipe the machine body with a dry cloth to remove dust, ballast and oil, and keep the heat dissipation smooth.

3. Check whether the connecting bolts and nuts are loose, especially the eccentric wheel parts.

4. If there is abnormal noise or vibration intensity, stop the machine to check whether the bearing and eccentric device are damaged or loose.

5. Check daily before starting the machine and replace them according to the specified period (usually every 50 hours).

6. Check daily for blockage to prevent engine power from being affected by poor air intake.

7. Ensure the use of clean and unadulterated petrol, and check that the oil pipe connection is tight and free from leakage.

8. Make sure the output voltage is stable and not overloaded to avoid burning the motor.

9. Generator work vibration should not be too large, should check whether the anti-vibration pads, base, etc. loose.

Our company is based in the Zhengzhou High-Tech Industrial Development Zone, covering an area of more than 30 mu (approximately 20,000 square meters). Our factory has a total construction area of about 15,000 square meters, including a modern office building of over 5,000 square meters.