The Rail Track Cutting Machine DQ-5 is equipped with a high-capacity 72V lithium battery, offering a lightweight, portable, and integrated design. The removable battery allows for easy replacement and charging. This Rail Track Cutting Machine provides safe and reliable operation, and its constant speed control technology ensures stable cutting performance even under high load, completing 60kg/m rail cuts in under 100 seconds.

Product Description

The DQ-5 Rail Track Cutting Machine supports harsh working environments from -40℃ to 45℃, meeting complex conditions such as high cold, plateau, and confined spaces. Lightweight, environmentally friendly, and efficient, it is ideal for track maintenance, emergency repair, and daily railway upkeep.

Technical Specifications

Working Voltage	5.8KW(7.9PS)/5400rpm
DC Brushless Motor Power	5 KW
Working Speed	4500 rpm
Cutting Accuracy	Vertical deviation 0.3mm, Plane deviation 0.35mm
Cutting Time	Less than 100s (60 rails)
Dimensions (mm)	805x237x460
Machine Weight	13-21Kg depending on battery pack
Operating Temperature	-40°C to 45°C
Battery Pack Voltage/Capacity	72V / 12Ah or 16Ah
Battery Life	12Ah: 3-5 rails, 16Ah: 6-8 rails, 1000 charge cycles
Motor Protection Level	IP45 (rainproof)
Charging Time	Less than 3 hours

Applications

Daily railway maintenance using the Rail Track Cutting Machine.
Emergency repair of track breakage and cracks.
Construction of subway, light rail, and high-speed rail lines.
Portable operations in mountains and areas without power supply.

Advantages

5kW DC brushless motor ensures constant speed output and high efficiency.
Lightweight, integrated main unit with detachable battery for easy handling.
Operates in extreme environments: -40℃ to 45℃.
Zero emissions, low noise, safe for confined spaces.

Safety Instructions

Maintain at least 15m distance around the cutting wheel.
Do not refuel while the machine is running.
Ensure proper ventilation when handling battery and fuel.
Do not replace blades when hot.

Storage & Maintenance

Check motor temperature and bearings every 3 months.
Check and tighten screws every 500 cuts.
Charge battery to 50~70% before storage.
Recharge battery every 3 months if unused for long periods.

FAQ

Q1: Payment terms?
A: T/T, L/C, D/P, WEST UNION, CASH etc.
Q2: Deposit?
A: 30% deposit, 70% balance, negotiable.
Q3: Delivery time?
A: Usually 5-7 days after deposit.
Q4: Packaging?
A: Standard export packing, wooden box or carton.
Q5: Shipping method?
A: By air or sea depending on requirement.
Q6: Do you have users in my country?
A: Exported to over 20 countries, contact agents if needed.
Q7: Quality guarantee?
A: One year (wear parts excluded).
Q8: Sample or custom service?
A: Yes.